我们专注服务于当下互联网基础设施建设与云计算、大数据时代的各种需求!

给火箭2340阵列追加热备磁盘

将1/1的盘加入阵列2里面,作为spare disk
HighPoint CLI>create spare disks=1/1 name=2

查看设备状态

HighPoint CLI>query devices
ID Capacity MaxFree Flag Status ModelNumber
——————————————————————————-
1/1 2000.31 2000.31 SINGLE SPARE WDC WD2003FYYS-02W0B0
1/3 1000.12 0 RAID NORMAL WDC WD1003FBYX-01Y7B1
1/4 1000.12 0 RAID NORMAL WDC WD1003FBYX-01Y7B1
1/5 1000.12 0 RAID NORMAL WDC WD1003FBYX-01Y7B1
1/6 1000.12 0 RAID NORMAL WDC WD1003FBYX-01Y7B1
1/9 2000.31 0 RAID NORMAL WDC WD2002FYPS-02W3B0
1/10 2000.31 0 RAID NORMAL WDC WD2003FYYS-02W0B0
1/11 2000.31 0 RAID NORMAL WDC WD2003FYYS-02W0B1
1/12 2000.31 0 RAID NORMAL WDC WD2003FYYS-02W0B0

已经为spare状态,成功!下面是create的一些语法
HighPoint CLI>help create
Create Command
This command allows you to create a new RAID array or add a spare disk.
Syntax:
create {RAID0|RAID1|RAID3|RAID5|RAID6|RAID10|RAID50|JBOD|spare} [create-options]

create-option:

disks=1/2,1/3… or disks=*
Specify the disks used to create array.
name=array name
Specify the name of the array which will be created.
src=source array ID
If src argument is specified, OCE/ORLM will be started.
cp=WB, WT or NONE
Cache Policy option (WB: write back, WT: write through).
init={foreground|background|keepdata|quickinit}
Specifies array initialization option.
foreground:
Zero out all data on the array. The array is not
accessible by the operating system until initialization is completed.
background:
Allow instant access to the array. Parity blocks
will be generated in background.
keepdata:
Setup array information blocks on the drives only.
Use this option for array recovery.
quickinit:
Setup array information blocks and zero out MBR data on the array.
capacity=array capacity
Specify the capacity (xxM,xxG) of the target array.
matrix=n*m
When create RAID50 to specify the matrix options.
n : number of subarray’s disk, m: number of subarray.
For example: When create a RAID50 the option matrix
can be matrix=3*2. That means 2 RAID5s each with 3 disks to form a RAID50
bs=size
Specify the block size (16k,32k,64k,128k,256k,512k,1024k)
sector=size
Specify the sector size (512B,1k,2k,4k)

 

下列检测磁盘状态脚本

hptraidconf -u RAID -p hpt query devices 1/1
hptraidconf -u RAID -p hpt query devices 1/3
hptraidconf -u RAID -p hpt query devices 1/4
hptraidconf -u RAID -p hpt query devices 1/5
hptraidconf -u RAID -p hpt query devices 1/6
hptraidconf -u RAID -p hpt query devices 1/9
hptraidconf -u RAID -p hpt query devices 1/10
hptraidconf -u RAID -p hpt query devices 1/11
hptraidconf -u RAID -p hpt query devices 1/12

定义定期发送邮件检测!